HOOVER SPINSCRUB OWNER'S MANUAL Pdf Download (2024)

FAQs

How much solution do you put in the Hoover Power Scrub? ›

Usually depending on the model of the machine use 2-3 oz in the solution tank and then fill the rest with water." So take your pick... the lable or Hoover customer service.

All Hoover carpet cleaners have a clean water tank and dirty water tank. Remove the clean water tank at the top by pressing on the lock on the handle. Unscrew the cap to the water compartment and fill the tank up to the fill line with water. Add cleaning solution to the solution compartment or water tank.

Yes, you can use Bissell Deep clean and refresh formula, for Hoover Steamvac Dual V and other models.

4. Add 3 ounces per gallon to warm water in the clean water tank. For AutoMix machines, fill solution tank. Always consult owner's manual.

Any solution will do. I actually used a Bissell solution because it was much cheaper than the Hoover brand. Carpets came out very clean and soft. Like others have mentioned I also used hot water in the water tank.

Just fill the water compartment with hot tap water, fill the Soap compartment with Cleaning Solution. Set knob on front of it to "Wash". Replace tank by tilting it back in. There is a step-button on the left to release the hinge, and a step-button on the right to operate Power On/Off (like a standard upright vac).

We recommend using warm water when possible, but either hot or cold water can be used.

I do like to tell people that it's not a bad idea to rinse the carpet they've just cleaned with hot tap water. It's especially important and effective on extra dirty carpets, and it's pretty easy to do.

I rinsed well. I extracted for both wash and rinse very very well. It is nice to have a switch to simply turn then rinse. My carpets dried in an hour!

Yes! You can use OxiClean™ Large Area Carpet Cleaner in any carpet cleaning machine. Just use the product as directed and follow all usage directions in the home owned or rental carpet cleaning machine's user guide.

Can I use vinegar in my Hoover carpet cleaner? ›

The short answer is that you should not use vinegar for carpet cleaning. There is truth to the idea you can use vinegar as a natural disinfectant for cleaning but it cannot remove dirt or soil from a surface or from carpet.

Laundry soap is designed to be used in washing machines to clean clothing. Using it to clean your carpets can damage owned or rented cleaning equipment and the carpet you're trying to preserve. It's also important to note that not all laundry detergent contains the same ingredients.

Just fill the water compartment with hot tap water, fill the Soap compartment with Cleaning Solution. Set knob on front of it to "Wash". Replace tank by tilting it back in. There is a step-button on the left to release the hinge, and a step-button on the right to operate Power On/Off (like a standard upright vac).

The Power Scrub Elite Pet Plus also has Large Capacity clean and dirty water tanks to hold and collect over 1.25 Gal. of water so you spend less time emptying and refilling.